#!REQUIREMENT Expression

owenlynda

@SurgeTeam please support expression such as WIFI or CELLULAR on SurgeiOS in [General] e.g.

[General]
dns-server = 192.168.1.1 #!REQUIREMENT WIFI
dns-server = system #!REQUIREMENT CELLULAR

This is because it is possible to edit the particular iOS Wi-Fi(SSID) DNS settings in "Settings>Wi-Fi>SSID>DNS>Configure DNS>Manual>11.22.33.44" but it is not possible to edit the DNS of Cellular as it is dynamic and determined by Surge itself when Cellular is used

mieqq

owenlynda
[SSID Setting]
TYPE:CELLULAR dns-server=system
TYPE:WIFI dns-server=xxx

owenlynda

mieqq Thank you

owenlynda

mieqq I wrote more than one item in the parameter but it is not showing when I checked the UI.

[SSID Setting]
TYPE:WIFI dns-server=45.90.30.0,192.168.1.1
TYPE:CELLULAR dns-server=45.90.30.0,system

but one item works and shows in the UI

[SSID Setting]
TYPE:WIFI dns-server=192.168.1.1
TYPE:CELLULAR dns-server=system

mieqq

You should go to Utilitues-Network Diagnostiics to check the effective dns server

owenlynda

mieqq Yes, it shows only one of the dns servers which is the first one: 45.90.30.0 or do I need to put space in between 45.90.30.0 and 192.168.1.1

mieqq

owenlynda

[SSID Setting]
TYPE:WIFI dns-server="45.90.30.0,192.168.1.1"
TYPE:CELLULAR dns-server="45.90.30.0,system"

Comma is a delimiter, so double quotes are needed to avoid parsing errors.

owenlynda

mieqq Thank you. Yes, it works now but it is not documented in https://manual.nssurge.com/rule/subnet.html
Also, please @SurgeTeam can we have a use case of RULESET and DOMAIN-SET for [Host] matching efficiency since this feature is newly supported.
Also, please @SurgeTeam support the use of inline RULESET for [Host] matching efficiency.

mieqq

owenlynda

https://manual.nssurge.com/others/subnet-settings.html