mryee2023 [General] #!include base.dconf [Proxy] #!include base.dconf [Proxy Group] #!include base.dconf [Rule] #!include base.dconf #希望这里能添加新的规则来覆盖include中的同名规则 [MITM] #!include base.dconf
mryee2023 大家都不需要这样的功能吗？ 比如mac / iPhone都用同样的策略组，两份配置用配置分离应用，但在iPhone上需要用subnet规则，mac上不想用，直接修改规则会导致mac上也同时启用。
mieqq mryee2023 可以尝试逻辑规则 AND 配合 DEVICE-NAME 规则和 SUBNET 规则，例如： [Rule] AND,((SUBNET,SSID:HOME), (DEVICE-NAME,iPhone)),DIRECT // 假设本机名称为 iPhone
mryee2023 mieqq iPhone15为手机名称，连上Xiaomi_F767时，希望走ATV。 实际测试下来，并未生效： [Rule] AND,((SUBNET,SSID:Xiaomi_F767), (DEVICE-NAME,iPhone15)),DEVICE:APPLETV ......
mieqq mryee2023 19:45:48.511724 [Rule] Rule matched: AND ((SUBNET,SSID:HUAWEI*), (DEVICE-NAME,mieq's iPhone)) 19:45:48.513623 [Connection] Disconnect with reason: Failed to establish connection (The specified device APPLETV was not found. Please check the device name.) 试了下没问题，能匹配。
